Safety management

Leading vs lagging safety indicators, with examples

What leading and lagging safety indicators are, examples of each, how to choose a balanced set, and the mistakes that turn good metrics into box-ticking.

Updated 7 minute readBy the EHS Nation team

Most safety scorecards start with injury rates. They matter, but they tell you about the past, and at a small site they're mostly noise. Leading indicators measure the work that prevents the next injury. A good program uses both.

The difference

ComparedLagging indicatorsLeading indicators
MeasureHarm that has already happenedActivities and conditions that prevent harm
DirectionBackward-lookingForward-looking
Good forComparing with your industry, and long-term trendsSteering the program month to month
WeaknessToo late to act on, and noisy at small sitesEasy to turn into box-ticking

OSHA puts it the same way in its guide Using Leading Indicators to Improve Safety and Health Outcomes.

Lagging indicators

  • Total recordable incident rate (TRIR): recordable cases per 100 full-time workers.
  • DART rate: cases with days away, restricted work or a job transfer.
  • Lost-time incident rate (LTIR): cases with days away from work.
  • Severity rate: days away and restricted per 100 full-time workers.
  • Serious injuries and fatalities (SIF), and events reported to OSHA.
  • Workers' compensation claims and costs.

The rates come straight from your OSHA log and hours worked. The incident rate calculator works them out and shows the formula.

Leading indicators

Good leading indicators are tied to your real risks, and each one points to an action. Some examples:

Reporting and learning

  • Near misses and hazards reported per 100 workers
  • Share of reports from frontline workers, not just supervisors
  • Days from a report to the first response

Fixing problems

  • Corrective actions closed by their due date
  • Overdue actions, by risk level
  • Repeat findings at the same place

Doing the planned work

  • Planned inspections completed on time
  • Training current for each role, and certificates about to expire
  • Job hazard analyses reviewed in the last year
  • Permits to work audited in the field

Leadership and involvement

  • Leader safety walks completed
  • Workers involved in inspections, JHAs or investigations

Choosing a balanced set

  1. Start from your biggest risks. If serious injuries would most likely come from forklifts, measure the controls that prevent forklift injuries.
  2. Pick a few. Three to six leading indicators that leaders review every month beat twenty that nobody reads.
  3. Pair them with outcomes. Keep your lagging rates to see whether the leading work is paying off over time.
  4. Measure quality as well as quantity. "Inspections done" means little if every one passes. Add "findings per inspection" or "actions closed".
  5. Review and change them. When an indicator is always green, it's stopped telling you anything.

ISO 45001 asks organizations to decide what to monitor and measure, and to evaluate their OH&S performance against it. A balanced set of indicators is how most do that. ISO 45001 9.1

Mistakes to avoid

  • Rewarding low injury numbers. Bonuses or prizes for zero injuries can discourage reporting. Employers must have a reasonable reporting procedure and must not retaliate against employees for reporting. 1904.35
  • Counting activity, not effect. A target for "50 observations a month" gets 50 observations, not 50 useful ones.
  • Reading too much into small numbers. At a site of 50 people, one recordable case moves the TRIR by about 2. Look at trends over 12 months or more.
  • Celebrating fewer near-miss reports. A drop often means people stopped reporting, not that the site got safer.

Questions

Frequently asked questions

What is a leading indicator in safety?

A measure of the activities and conditions that prevent harm, taken before anyone gets hurt. Examples include near misses reported, corrective actions closed on time, inspections completed and training current.

What is a lagging indicator in safety?

A measure of harm that has already happened, such as the total recordable incident rate (TRIR), the DART rate, lost-time cases or workers' compensation costs.

Is near-miss reporting a leading or lagging indicator?

It's usually treated as a leading indicator, because a near miss is a warning before harm, and a rising reporting rate often means a healthier reporting culture rather than a less safe workplace.

How many safety KPIs should we track?

Few enough that leaders can review every one of them each month and act on what they see. A handful of leading indicators tied to your biggest risks, alongside your main lagging rates, is usually more useful than a long list.

Regulations and standards

The rules behind it

Summaries on this site are in our own words. Follow a link to read the official text. EHS Nation helps you keep records and run your program; it doesn't replace your own judgment or legal advice.

See EHS Nation with your own sites and forms.

Book a demo and we'll walk through the platform with your locations, your forms and your questions. No slides, no pressure.